vBCms Comments
Welcome To Hunting Country
General Hunting Forums
Archery & Bowhunting
Shooting Sports
Manufacturers' Corner
Firearms
Classifieds
Not Hunting / General Chit Chat
1.) Ohbuckhunter - 10/27/2017
It's been awhile. Still married to Jess thank god. :). No more new kids. We bought a new house. House came with a sawmill business. Still hunt as much as possiable but 4 kids and 2 business is very hard to get in the woods like I use too. Hope everyone is doing good. I'll stop in more I promise.
2.) DParker - 10/27/2017
[QUOTE=Ohbuckhunter;52744]It's been awhile.[/QUOTE]
Where the hell ya' been, man?!
[QUOTE=Ohbuckhunter;52744]Still married to Jess thank god. :).[/QUOTE]
Wow. You'd think she'd have sobered up by now. :grin:
[QUOTE=Ohbuckhunter;52744]No more new kids. We bought a new house. House came with a sawmill business. Still hunt as much as possiable but 4 kids and 2 business is very hard to get in the woods like I use too. Hope everyone is doing good. I'll stop in more I promise.[/QUOTE]
It sounds like you're Mr. Successful! It's good to hear that all is well with you and yours. And even not getting getting in the woods much you'll still probably see more deer than I will this year.
Where the hell ya' been, man?!
[QUOTE=Ohbuckhunter;52744]Still married to Jess thank god. :).[/QUOTE]
Wow. You'd think she'd have sobered up by now. :grin:
[QUOTE=Ohbuckhunter;52744]No more new kids. We bought a new house. House came with a sawmill business. Still hunt as much as possiable but 4 kids and 2 business is very hard to get in the woods like I use too. Hope everyone is doing good. I'll stop in more I promise.[/QUOTE]
It sounds like you're Mr. Successful! It's good to hear that all is well with you and yours. And even not getting getting in the woods much you'll still probably see more deer than I will this year.
3.) bluecat - 10/28/2017
Hey hotshot!
4.) crookedeye - 10/28/2017
what do you mean by a sawmill? is that where you chop down a tree and saw it down to 2x's..if thats the case mill me up some 2 x 12's cedar.. i have this project i'm doing.
5.) crookedeye - 10/28/2017
this is a short video of obh last monday hard at work..
6.) Swamp Fox - 10/29/2017
I felt like I was gonna lose an arm while I was watching that.
Don't know how big your mill is, but a couple of people around here are killing it in that business. Good luck to you!
And don't be a stranger! Every once in a while a couple of us are here late. :ach:
But I have to say: All the good people took off, like you did ... LOL
:beer::wave:
Don't know how big your mill is, but a couple of people around here are killing it in that business. Good luck to you!
And don't be a stranger! Every once in a while a couple of us are here late. :ach:
But I have to say: All the good people took off, like you did ... LOL
:beer::wave:
7.) Ohbuckhunter - 10/29/2017
[QUOTE=crookedeye;52747]what do you mean by a sawmill? is that where you chop down a tree and saw it down to 2x's..if thats the case mill me up some 2 x 12's cedar.. i have this project i'm doing.[/QUOTE]
We don't have many cedar trees around here. I buy a truck load of logs from southern states every few months. I should be getting a load up here around the first of December.
We don't have many cedar trees around here. I buy a truck load of logs from southern states every few months. I should be getting a load up here around the first of December.
8.) Ohbuckhunter - 10/29/2017
[QUOTE=Swamp Fox;52752]I felt like I was gonna lose an arm while I was watching that.
Don't know how big your mill is, but a couple of people around here are killing it in that business. Good luck to you!
And don't be a stranger! Every once in a while a couple of us are here late. :ach:
But I have to say: All the good people took off, like you did ... LOL
:beer::wave:[/QUOTE]
My mill is a woodmizer LT70. Nyle kiln one I can dry 4500 bf at a time 12'6" and the other 18' but only 1500 bf. 5 head Moulder than I can make any trim that a person might need up to 8". Been building some furniture as well. I'll post a few pics here shortly.
Don't know how big your mill is, but a couple of people around here are killing it in that business. Good luck to you!
And don't be a stranger! Every once in a while a couple of us are here late. :ach:
But I have to say: All the good people took off, like you did ... LOL
:beer::wave:[/QUOTE]
My mill is a woodmizer LT70. Nyle kiln one I can dry 4500 bf at a time 12'6" and the other 18' but only 1500 bf. 5 head Moulder than I can make any trim that a person might need up to 8". Been building some furniture as well. I'll post a few pics here shortly.
9.) Ohbuckhunter - 10/29/2017
[QUOTE=bluecat;52746]Hey hotshot![/QUOTE]
How's it going blue kitty
How's it going blue kitty
10.) Ohbuckhunter - 10/29/2017
[URL=http://s495.photobucket.com/user/ohbuckhunter/media/9398050C-C3A8-496F-BAC7-7952C5C87071_zpslhognbay.jpg.html]
[/URL]
[URL=http://s495.photobucket.com/user/ohbuckhunter/media/72F03A13-1964-414A-8808-48F583424123_zpspwsei77n.jpg.html]
[/URL]
Turkey call coffee table
[/URL][URL=http://s495.photobucket.com/user/ohbuckhunter/media/72F03A13-1964-414A-8808-48F583424123_zpspwsei77n.jpg.html]
[/URL]Turkey call coffee table
11.) Ohbuckhunter - 10/29/2017
[URL=http://s495.photobucket.com/user/ohbuckhunter/media/A99DBC91-8886-47A3-8542-B1E6FCD8F7C5_zpsxyt6acy8.jpg.html]
[/URL]
[URL=http://s495.photobucket.com/user/ohbuckhunter/media/1ECE4D04-76CF-41C3-8188-6C67EB8ACEB6_zpswvxdmeov.jpg.html]
[/URL]
Walnut dresser
[/URL][URL=http://s495.photobucket.com/user/ohbuckhunter/media/1ECE4D04-76CF-41C3-8188-6C67EB8ACEB6_zpswvxdmeov.jpg.html]
[/URL]Walnut dresser
12.) Ohbuckhunter - 10/29/2017
[URL=http://s495.photobucket.com/user/ohbuckhunter/media/99503DA8-51C8-468E-A104-D07DE4BDEDD4_zpsul2lrnsi.jpg.html]
[/URL]
Walnut bed
[/URL]Walnut bed
13.) Ohbuckhunter - 10/29/2017
[URL=http://s495.photobucket.com/user/ohbuckhunter/media/6667812F-F83A-468D-8A77-BAE9FAE30982_zpsunmqnqr0.jpg.html]
[/URL]
Walnut kitchen table
[/URL]Walnut kitchen table
14.) Ohbuckhunter - 10/29/2017
[URL=http://s495.photobucket.com/user/ohbuckhunter/media/8D937C43-D759-48A2-A094-1065D3874AA2_zpspv3rl4pb.jpg.html]
[/URL]
[URL=http://s495.photobucket.com/user/ohbuckhunter/media/693B33B1-D1F7-44A6-9146-2DD4631B5EB9_zps60aqucke.jpg.html]
[/URL]
My mill
[/URL][URL=http://s495.photobucket.com/user/ohbuckhunter/media/693B33B1-D1F7-44A6-9146-2DD4631B5EB9_zps60aqucke.jpg.html]
[/URL]My mill
15.) Ohbuckhunter - 10/29/2017
[URL=http://s495.photobucket.com/user/ohbuckhunter/media/6D877E06-1096-4484-8F0E-E8A85F296B1E_zpss6ouebtp.jpg.html]
[/URL]
Cutting board
[/URL]Cutting board
16.) Ohbuckhunter - 10/29/2017
[QUOTE=DParker;52745]Where the hell ya' been, man?!
Wow. You'd think she'd have sobered up by now. :grin:
It sounds like you're Mr. Successful! It's good to hear that all is well with you and yours. And even not getting getting in the woods much you'll still probably see more deer than I will this year.[/QUOTE]
She is still blind. So I'm semi good looking still to her.
Wow. You'd think she'd have sobered up by now. :grin:
It sounds like you're Mr. Successful! It's good to hear that all is well with you and yours. And even not getting getting in the woods much you'll still probably see more deer than I will this year.[/QUOTE]
She is still blind. So I'm semi good looking still to her.
17.) Swamp Fox - 10/29/2017
LOL...I love the turkey call coffee table! :grin:
Are you building and/or finishing that stuff yourself?
I guess so, if I'd remember what I read ...LOL
Very nice!
Are you building and/or finishing that stuff yourself?
I guess so, if I'd remember what I read ...LOL
Very nice!
18.) Ohbuckhunter - 10/29/2017
[QUOTE=Swamp Fox;52764]LOL...I love the turkey call coffee table! :grin:
Are you building and/or finishing that stuff yourself?
I guess so, if I'd remember what I read ...LOL
Very nice![/QUOTE]
Yep. Turn everything from logs to either lumber ,trim, or furniture. Doing the wood stuff on my own. Well I have 1 employee to run my Moulder but it's only 4-5 days a month. Not allot of orders for trim right now. Mainly rough cut.
Are you building and/or finishing that stuff yourself?
I guess so, if I'd remember what I read ...LOL
Very nice![/QUOTE]
Yep. Turn everything from logs to either lumber ,trim, or furniture. Doing the wood stuff on my own. Well I have 1 employee to run my Moulder but it's only 4-5 days a month. Not allot of orders for trim right now. Mainly rough cut.
19.) Swamp Fox - 10/29/2017
Very cool. The next turkey call table you do, you should try to put a pin and the proper shapes to it so you can pull back the paddle to an open chamber for storing stuff, plus make a really sweet noise with a little chalk ...LOL
20.) DParker - 10/29/2017
[QUOTE=Swamp Fox;52768]Very cool. The next turkey call table you do, you should try to put a pin and the proper shapes to it so you can pull back the paddle to an open chamber for storing stuff, plus make a really sweet noise with a little chalk ...LOL[/QUOTE]
Careful, you'll have him caling in a T-Rex with that thing.
Careful, you'll have him caling in a T-Rex with that thing.
21.) Ohbuckhunter - 10/29/2017
[url]http://www.wideopenspaces.com/turkey-call-coffee-table-belongs-man-cave/[/url]
These folks did a write up on one of them. There's a video in there. Check it out
These folks did a write up on one of them. There's a video in there. Check it out
22.) Ohbuckhunter - 10/29/2017
[url]https://www.facebook.com/2mlumber/posts/920630091405835[/url]
Might be able to see here as well
Might be able to see here as well
23.) Swamp Fox - 10/29/2017
Very nice. :-)Just goes to show I am not first to the party with all my ideas, LOL
If you make one that makes a decent noise, let me know first. I'm serious. :wink:tu:
If you make one that makes a decent noise, let me know first. I'm serious. :wink:tu:
24.) Ohbuckhunter - 10/29/2017
Define decent noise lol. Done that well
[URL=http://s495.photobucket.com/user/ohbuckhunter/media/FD182E9B-BAE0-4949-9CD1-65F9468D5A65_zpso1t500cq.jpg.html]
[/URL]
[URL=http://s495.photobucket.com/user/ohbuckhunter/media/21A3BBD5-E56D-421B-96EC-9B7F764E29A6_zpsmepni2z7.jpg.html]
[/URL]
[URL=http://s495.photobucket.com/user/ohbuckhunter/media/11788DA2-872D-470C-BBDA-AF8EF3969A92_zpsvab06sg5.jpg.html]
[/URL]
[URL=http://s495.photobucket.com/user/ohbuckhunter/media/FD182E9B-BAE0-4949-9CD1-65F9468D5A65_zpso1t500cq.jpg.html]
[/URL][URL=http://s495.photobucket.com/user/ohbuckhunter/media/21A3BBD5-E56D-421B-96EC-9B7F764E29A6_zpsmepni2z7.jpg.html]
[/URL][URL=http://s495.photobucket.com/user/ohbuckhunter/media/11788DA2-872D-470C-BBDA-AF8EF3969A92_zpsvab06sg5.jpg.html]
[/URL]25.) Swamp Fox - 10/29/2017
Think of the biggest doofus bozo in the turkey section of Bass Pro on March 31, trying out box calls on display...If it's at least as good as that, I'd call it decent. LOL
That table there is very sweet.
Check with Bluecat about getting some cherry wood ...LOL
That table there is very sweet.
Check with Bluecat about getting some cherry wood ...LOL
26.) Ohbuckhunter - 10/29/2017
To make a table that makes noise is very timely. Once I fork over 20k on a Cnc router I could knock them out quicker but I'm not buying that just for those. There's other things I could do with it as well but need to figure out shipping and what not cause folks around me are poor and think hand made stuff should be Walmart prices.
27.) Swamp Fox - 10/29/2017
If you could make one that made a decent sound and made a video of a couple of goobers playing with it (I nominate KyHunter and Dan-o), you'd soon have more business than you could handle.
Just don't let them wrassle in a tub of chalk dust like they're ring girls. That would be too disturbing.:shocked:
I know a guy who made semi-custom canoes and he did some of his business doing his own deliveries half-way across the country, and others by local pick-up, often paired with a guided fishing trip in his area. Lots of other businesses offer local pick-up. I'm thinking about the Blob archery target and one or two other small boat builders. Kayak companies often do demo days in conjunction with local outdoor shops, and let people buy models right off the trailer.
Just don't let them wrassle in a tub of chalk dust like they're ring girls. That would be too disturbing.:shocked:
I know a guy who made semi-custom canoes and he did some of his business doing his own deliveries half-way across the country, and others by local pick-up, often paired with a guided fishing trip in his area. Lots of other businesses offer local pick-up. I'm thinking about the Blob archery target and one or two other small boat builders. Kayak companies often do demo days in conjunction with local outdoor shops, and let people buy models right off the trailer.
28.) crookedeye - 10/29/2017
[QUOTE=Ohbuckhunter;52753]We don't have many cedar trees around here. I buy a truck load of logs from southern states every few months. I should be getting a load up here around the first of December.[/QUOTE]
im still roofing...im thinking in a couple years i might get my own business going..cleaning up dog shit..i got my eye on this van to use as a work truck..
im still roofing...im thinking in a couple years i might get my own business going..cleaning up dog shit..i got my eye on this van to use as a work truck..
29.) crookedeye - 10/29/2017
i think it may work out..
30.) Ohbuckhunter - 10/29/2017
[QUOTE=crookedeye;52780]im still roofing...im thinking in a couple years i might get my own business going..cleaning up dog shit..i got my eye on this van to use as a work truck..[/QUOTE]
That's my second business/ main source of income. Last year we did 243 roofs. To bad 95% of them are jobs I subbed from sears
That's my second business/ main source of income. Last year we did 243 roofs. To bad 95% of them are jobs I subbed from sears
31.) crookedeye - 10/29/2017
[QUOTE=Ohbuckhunter;52782]That's my second business/ main source of income. Last year we did 243 roofs. To bad 95% of them are jobs I subbed from sears[/QUOTE]
im going to do epdm tpo roofs i think like you said, get a 30 40 square roof for 30 grand tear off.. maybe 3 a year and screw off the rest of the year..only thing i worry about is health ins. a ac unit installed on a roof is at least a grand just to roof it.. pitch pans are 200 bucks, i can do one in 5 minutes
im going to do epdm tpo roofs i think like you said, get a 30 40 square roof for 30 grand tear off.. maybe 3 a year and screw off the rest of the year..only thing i worry about is health ins. a ac unit installed on a roof is at least a grand just to roof it.. pitch pans are 200 bucks, i can do one in 5 minutes
32.) crookedeye - 10/29/2017
maybe 10 15 grand a 30 square tear off, but still you going to make alot of money..
33.) crookedeye - 10/29/2017
i can see it now CE and ob's roofing, of course with my nowledge and do it all attitude i'll get 80 percent of the cut..
34.) Ohbuckhunter - 10/29/2017
I was all for it till the last part of the %. We did a 67 square roof Tuesday tear off n put back on. 10/12 pitch. I have 6 south of the border employees
35.) Jon - 10/30/2017
I can't see his pictures he hosted on photobucket but you guys can?
36.) Swamp Fox - 10/30/2017
They were up Sat. night but got zapped by Sunday morning.
37.) luv2bowhunt - 10/31/2017
[QUOTE=Ohbuckhunter;52788]I was all for it till the last part of the %. We did a 67 square roof Tuesday tear off n put back on. 10/12 pitch. I have 6 south of the border employees[/QUOTE]
10/12 pitch? You're lucky. Well when I was roofing we used to do 24/12 pitches, in the dark, no jacks, and got paid 0.30 an hour for it. :re:
Good to see you're still alive Ohbie, but I know you're lying. You will post a few days and then there will be.....................................................
10/12 pitch? You're lucky. Well when I was roofing we used to do 24/12 pitches, in the dark, no jacks, and got paid 0.30 an hour for it. :re:
Good to see you're still alive Ohbie, but I know you're lying. You will post a few days and then there will be.....................................................
38.) Swamp Fox - 10/31/2017
[QUOTE=luv2bowhunt;52821]10/12 pitch? You're lucky. Well when I was roofing we used to do 24/12 pitches, in the dark, no jacks, and got paid 0.30 an hour for it. :re:
[/QUOTE]
"And we [B]liked[/B] it!!"
[/QUOTE]
"And we [B]liked[/B] it!!"
39.) bluecat - 10/31/2017
Ooh, good one. + 4